UAB “ Nano sensorics”
🎯
Pakaunės g. 70, LT
-47243 Kaunas
🌐
✉
Push button and LED indicator description:
•
Once battery (batteries) is installed or reset button will be pushed in the sensor, it will
automatically attempt to connect to the LoRaWAN network and the LED indicator will start to be
blinking / flashing for 5 blinks.
•
In case of the successful connection to the LoRaWAN network LED indicator will stay on for 3
seconds and LED indicator will stop flashing and go dark. This means sensor successfully connected
to the LoRaWAN network.
•
If the sensor will not connect on the initial try, it will attempt to connect to the LoRaWAN network
after 10 seconds, then after 60 seconds, then after 10 minutes, then after 1 hour, then after 24
hours till successful connection to the LoRaWAN network.
•
The sensor will restart by pressing the button on the sensor and it will attempt instantly to connect
the LoRaWAN network.
The TEMPHU sensor has to be installed reliably and with appropriate screws. The sensor must not be placed
near any air vents windows, door openings where the constant fresh air flow is possible. The sensor is not suitable
to be installed for the outdoor locations. The sensor cannot be stored at dusty or dirty areas with excess operation
and storage temperature. The sensor is not washable, paintable. The open holes of the case must not be blocked,
glued with any material. Do not throw the battery into a fire to prevent the battery from exploding. Damaged
batteries may also explode. All of the above suggestions apply equally to your device, battery and accessories.
The TEMPHU sensor is maintenance free except replacement of the batteries.
Regulations
UAB “Nano sensorics” is the company which develops and produce highly innovative sensors with
integrated intelligent computational algorithms (AI) enabling extremely low power data transmission. Declaration
of conformity Hereby, UAB „Nano sensorics“ declares that
TEMPHU complies with the essential requirements and
other relevant provisions of Directive CEM 2014/30/UE, BT 2014/35/UE, RED 2014/53/UE, CE, RoHS
This document contains proprietary technical information which is the property of UAB „Nano sensorics“.
All information must not to be disclosed through any means is prohibited unless expressed, written consent of
authorized representative of UAB „Nano sensorics“
is obtained.
All information, including but not limited to the technical specification are subject to change without
notice. UAB „Nano sensorics“
reserves all rights to change, modify, update software, firmware, documentation
without any obligation to notify any individual or entity. In the event that any changes are made, the revised
Information shall be posted on this website, manuals, technical specification. Please check the latest information
posted herein to inform yourself of any changes. Nano sensorics and Nano sensorics. All products,
UAB “
Nano
sensorics
”
names, logos, trademarks are property of
UAB „Nan
o sensorics.
