Nanni T4.205 Operator'S Manual Download

Page: 37 / 67

EVERY 200 OPERATING HOURS / AT LEAST EVERY YEAR.



Change the engine and transmission oil *.



Change the oil filters *.



Change the fuel filters *.



Check the raw water pump impeller. Change if needed.



Check the engine flexible mountings. Adjust as necessary *.



Clean the Turbo Wastegate.



Clean and touch up the paintwork as necessary.

EVERY 400 OPERATING HOURS / AT LEAST EVERY 2 YEARS.



Change the thermostat of the heat exchanger.



Change the heat exchanger filler plug.



Drain and change the coolant. Clean the coolant system.



Check and clean the heat exchanger tube stack. Change the O-ring.



Check and clean the air cooler tube stack. Change the O-ring. Check

and clean the transmission oil cooler tube stack.



Check the fuel injection nozzles. Change if needed.



Check cold valve clearance.



Check and clean the Turbo. Change the thermal protection of the turbo.

EVERY 1000 OPERATING HOURS / AT LEAST EVERY 4 YEARS.



Change the flexible engine mounts



Change the timing belt.

Summary of Contents for T4.205




































































Search results

Summary of Contents for T4.205

Reviews:

Related manuals for T4.205

Brands by name

Popular brands

Nanni T4.205, Operator'S Manual

Search results

Summary of Contents for T4.205

Reviews:

Related manuals for T4.205

Brands by name

Popular brands