29
⑩
FIRMWARE UPDATE
Rotate the "Right knob" to "Update", press the "Right knob" to enter the interface to search for the firmware files.
·
Download the firmware files of light fixture and control unit, and put into the root directory of the USB drive(ensure
the firmware versions match), and connect the USB drive to the USB port.
Note:
(1)Please do not rename the updated file
(2)Ensure the USB flash drive is formatted to FAT, FAT32 or exFAT.
(3)If prompted that "PLEASE CONNECT THE LAMP HEAD TO THE CONTROLLER BEFORE
FIRMWARE UPDATE", please check whether the light fixture is connected to the control unit or whether the
connection is loose.
(4)If prompted that "THE VERSIONS OF THE TWO FIRMWARE FILES DON'T MATCH, PLEASE CHECK THE
FILES AND TRY AGAIN", please check whether the versions of the two firmware files are consistent.
(5)If prompted that "MISSING PARTS OF FIRMWARE FILES,PLEASE CHECK THE FILES AND TRY AGAIN",
please check whether there are two firmware files in the USB drive.
(6)If prompted that "NO FIRMWARE FOUND", please check whether the firmware files are correct, whether the
firmware files are stored in the root directory of the USB drive, or whether the USB drive format is FAT, FAT32
or exFAT.
(7)If all the above steps are done and the firmware files still cannot be found, try to format the USB flash drive again.
(8)If the light fixture still cannot identify the USB flash drive, please replace the USB flash drive.
MENU
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
BUTTON BACKLIGHT
LANGUAGE
FIRMWARE UPDATE
FULL
CH: 512
ON
MENU
CH: 512
SEARCHING FOR
FIRMWARE FILE
. . . . . .
ON
PRESS “MENU” TO RETURN
