3. When turn on the fixture, the display will light up normally, that means the power is active.
4. Adjust the fixture's brightness via "Dimmer knob", the brightness range is represented as L.000 - L.100.
5. Please change the filters to get different lighting effects.
6. 2.4G Wireless Remote Control
600DSA/900DSA/1200DSA are designed to work with a 2.4G remote controller or NANLITE Wi-Fi app via Wi-Fi
transfer device to control light freely.
NOTE: 2.4G remote controller or WiFi transfer devices should be bought additionally. (See separate instructions
for remote controller or Wi-Fi transfer device.)
7. Turn off the switch when you stop using it and remove the power adapter or battery.
DMX lighting console connection
The connection between the light fixture and a DMX lighting console should use 3-pin cable and make sure its
diameter is less than 0.5mm. Please use the 5-pin XLR plug to connect the DMX signal input/output interface.
XLR plug/socket and the cable should be connected as pictured above.
Please connect the DMX signal output interface of the console to the DMX signal input interface of the first fixture
with XLR cable, then from this first fixture's output interface to the second one's input interface and so on.
NOTE: The length of XLR cable should be within 300m and bought additionally.
4
