Nanjing Hanlong Technology UC862 User Manual Download

Page: 133 / 138

Upgrade

132

Phone. If the configured firmware server is found and a new code image is available, the

UC8xx will attempt to retrieve the new image files by downloading them into the

UC8xx’s SDRAM. During this stage, the UC8xx’s LEDs will blink fastly until the

checking/downloading process is completed. Upon verification of checksum, the new

code image will then be saved into the Flash. If TFTP/HTTP/FTP/HTTPS fails for any

reason (e.g. TFTP/HTTP/FTP/HTTPS server is not responding, there are no code image

files available for upgrade, or checksum test fails, etc), the UC8xx will stop the

TFTP/HTTP/FTP/HTTPS process and simply boot using the existing code image in the

flash.



Firmware upgrade may take as long as 3 to 8 minutes over Internet, or just 1 minutes if

it is performed on a LAN. It is recommended to conduct firmware upgrade in a

controlled LAN environment if possible. For users who do not have a local firmware

upgrade server.



Hanlong’s latest firmware is available at

http://www.h-tek.com



Support



Firmware

Download.



Oversea users are strongly recommended to download the binary files and upgrade

firmware locally in a controlled LAN environment.

To upgrade manually via the Web configuration interface

Click Management

→

Upgrade

Click Brower or the blank.

Select the firmware (fw8xx.rom )and then click

Configuration File

To download configuration file:

Summary of Contents for UC862











































































































































Search results

Summary of Contents for UC862

Reviews:

Related manuals for UC862

Brands by name

Popular brands

Nanjing Hanlong Technology UC862, User Manual

Search results

Summary of Contents for UC862

Reviews:

Related manuals for UC862

Brands by name

Popular brands