User Manual Nanight C3 Dive light
Thank you for choosing a dive light
from Nanight! The light is
designed for diving at depths of
up to 200m. We at Nanight hope
your new light will give you many
rewarding days and nights of
diving!
PRODUCT DESCRIPTION
●
LED Type: Cree XHP70
●
Battery: 14,4V Panasonic Li-Ion,
6700 mAh
●
4-step dimming
●
Operating temperature: 0 – 35°C
●
Light output 4000lm
●
Burn time at full power: 120min. See
end.
NANIGHT C3 INCLUDES
●
Dive light
●
Charger
●
Case
●
Soft goodman handle
●
Carbon goodman handle
WARNING:
The battery pack in this light is of Li-Ion type. This kind of
battery may explode if charged incorrectly, short circuited
or damaged in any way. Charge the light outside away
from flammable materials. Never charge the light in direct
sunlight or in temperatures above 35°C. If the light or
battery becomes hot, immediately disconnect the charger,
open the canister and place the light in a fire proof area
outside and don’t use the light again until a Nanight
service center has checked the light. Never use a light that
has been flooded. Regularly open the canister and check
for over pressure if the light is equipped with an external
charging port. Replace the battery if the battery is
damaged or have significantly lost capacity. Only use
original Nanight battery packs with this product.
When diving in dark water, a backup dive light should always
be brought.
Nanight C3 is a bright light. Never direct the light directly into
the eyes of yourself or others.
When using the dive light above water, it may become hot.
Be careful not to burn yourself or others.
Do not disassemble the dive light while it’s still wet.
Summary of Contents for C3
Page 5: ......
