NAMI ELECTRIC BURN-E, User Manual, Page: 14 / 64

HOW TO SET UP THE SCOOTER
Assembly of the scooter
MAKE SURE THE KICKSTAND IS UNFOLDED BEFORE
PREPARING THE FOLLOWING SETUP:
1.
Position the handlebars using the
stem in the axis of the steering
column�
2. Tighten the four M5 screws of the
stem as tight as possible�
3.
Find the correct angle and position
of the brake lever by tightening the
screw with the 4mm Allen key�
REPRODUCE THESE PREVIOUS SETUP FOR THE
FOLLOWING ITEMS:
• the dashboard support
• the dashboard switch
• the accelerator and the lighting
• horn switch�
Then tighten them correctly using the
supplied tool kit�
IF ANY OF THE ITEMS MENTIONED ARE MISSING, IMMEDIATELY CONTACT THE STORE
WHERE YOU PURCHASED THIS SCOOTER�
14
USER MANUAL - EN