NAMCO WORLD KICKS, Operator'S Manual

Page: 38 / 86

Page 38
5-1 Fitting the Header Assembly
The Header Assembly has a forward centre of gravity, so it is important that at
least two people are used to fit or remove the Header Assembly.
The fitting position of the Header Assembly is high, and it is important that a
means of reaching the height safely, without stretching, is available. (e.g. Steps,
Step Stool etc.)
1. Place the Header Assy on to the Monitor Cabinet and slide the Header Assy
backwards so that the Header Support Tube engages under the Header
Retaining Brackets.
2. Fit 4off hex headscrew (M8x40) to retain the Header Assy to the Monitor Cabinet.
3. Connect the connector.
4. Fit the Connector Bracket using 1off socket button head screw (M5x10).
Header Assy
Connector
Connector Bracket
Header Retaining Bracket
Hex head screw
(M8x40)
Socket button head screw
(M5x10)