NAMCO Vampire Night DX, Operator'S Manual

Page: 72 / 85

Page 71
7-7-4 Replacing the Gun Cable
1. Remove the Switch Panel Assy. (See 7-5 page 65)
2. Remove the Gun Assembly. (See 7-7 page 67)
3. Remove the Gun Covers (See 7-7-1 page 68)
4. Seperate the Gun Body. (See 7-7-2 page 69)
5. Remove 2off socket head screw (M4x10) and remove the Connector Cover.
6. Disconnect the terminals from the Trigger Switch.
7. Disconnect the Gun PCB connector.
8. Remove 1off socket head screw (M4x10) and remove the Gun Cable.
9. Reassemble in reverse order.
Note: When refitting the Gun Cable, ensure that the Earth terminal is refitted
securely.
Note: Always reinitialize the guns if the guns has been removed or replaced.
(see 6-2-3-1 page 47)
Socket head screw
(M4x10)
Connector cover
Connector
Gun cable
Gun body (L)
Fast-On terminals
Earth terminal
PCB connector
Socket head screw
(M4x10)