NAMCO Vampire Night DX, Operator'S Manual

Page: 70 / 85

Page 69
Socket cap screw
(M3x10)
Socket head screw
(M4x25)
Socket head screw
(M4x10)
Socket head screw
(M4x10)
Gun Body (R)
NF-Gun (DX) PC Board
Gun Body (L)
Lens
Dome nut (M4)
7-7-2 Separating the Gun Body
1. Remove the Switch Panel Assy. (See 7-5 page 65)
2. Remove the Gun Assembly. (See 7-7 page 67)
3. Remove the Gun Covers (See 7-7-1 page 68)
4. Remove 4off socket head screw (M4x10), 4off dome nut (M4). 1off socket
head screw (M4x25), 1off socket cap screw (M3x10) and remove the Gun
Body (R).
Note: When reassembling the Gun Body ensure that the Lens is fitted correctly, (Curved
face of lens faces forward.). Failure to fit the lens correctly will prevent the gun
from working properly.
Note: Always reinitialize the guns if the guns has been removed or replaced.
(see 6-2-3-1 page 47)
Lens
(Curved face to front)