Page 49
6-3-3-1 I/O PCB Test
1.
Select I/O PCB CHECK from the I/O Test Screen. The following screen is
displayed:-
Note: This screen is for information only. No adjustments are available.
6-3-3-2 Go to [I/F Initialize]
This item initializes the control devices.
Selecting this option displays the I/F INITIALIZE screen which allows initialization
of the Potentiometer settings for the Steering wheel, Accelerator and Brake
Pedals.
(see section 7 page 56)
I / O TEST
DIP SW
1234 [ON : RED]
LINK
ON
LINK AS
1 (LEFT)
I / O PCB CHECK
namco ltd: FCA-1: ver 1.00: EXP
Multipurpose + Rotary Encoder
I/O PCB CONNECT OK NAMCO LTD.
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
