![background image](http://html2.mh-extra.com/html/namco/quick-and-crash/quick-and-crash_operators-manual_3181241072.webp)
Page 72
7-15
Replacing the Launcher Solenoid
1.
Remove the upper rear maintenance door from the Target Cabinet.
2.
Remove 1off pozi flange head screw (M4x6) and disconnect the Ring Tag
Terminal and Connector (CN25).
3.
Remove 4off socket flange screws (M6x10), with flat and spring washers, and
remove the Launcher Solenoid.
4.
Reassemble in reverse order.
Note: After replacing the solenoid, ensure that the solenoid position is adjusted
correctly.
(See section 6-4 page 43)
Pozi Flange Screw
(M4x6)
Ring Tag
Socket Flange Screw
(M6x10)
(with flat and spring washer)
Launcher Solenoid
Connector
(CN25)
Summary of Contents for Quick & Crash
