JUMPIN’ JACKPOT
™
Operator’s
Manual
7-
DEMO (DEMO MODE) When this is enabled, the game will function as if it had
tickets but not require or dispense them, also all credits will be cleared each game
played. (Default setting is “0")
8-
TIX MUL (TICKET MULTIPLIER) This sets the multiple value of you ticket. Use
this setting when your ticket value is 2x. (Default setting is “1")
9-
AG2JPOT (AVERAGE GAMES TO JACKPOT) This sets the average games
between each jackpot. (Default setting is “60") NOTE: Whenever you change this
value the game will need to stabilize over a couple jackpots to become accurate
again.
10-
DIFF (DIFFICULTY) This is used to set an auto difficulty (recommended) or a fixed
level of difficulty. Setting it to “A" is the auto difficulty and setting it between “1”
(easy) to “8” (hard) is a fixed difficulty. (Default setting is “A")
11-
RES DEF (RESET DEFAULTS) When this is set to “1" and you exit the menu
screen, all of the game settings will be restored to their defaults. (Default setting is
“0")
6.0 ERROR
MESSAGES
CONNECT PLATFORM HARNESS TO GAME. This error will be displayed when the
harness coming out of the pipe of the platform is not connected or damaged.
MAT SENSOR IS BLOCKED OR FAILED CLEAR MAT AREA AND CYCLE POWER.
This error will be displayed if game is powered up with an object on the platform or if there
is a problem with the platform.
XXX CLEAR MAT AREA XXX This error will be displayed when an object stays on the
mat for over 5 minutes. Clear the object and the game will automatically return to its
normal state.
7.0 DIAGNOSTICS
To test all the led’s hold down “2
nd
Coin” button as you press the service button.
To do a memory test hold down “3
rd
Coin” button as you press the service button. Wait
about 1 minute and the results will be displayed.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
