JUMPIN’ JACKPOT
™
Operator’s
Manual
2.0 INTRODUCTION
Namco’s JUMPIN’ JACKPOT
™
is a 1-player redemption game featuring an interactive
virtual jump rope.
Successfully jump until the all the letters in “JACKPOT” are lit up to win the JACKPOT!
3.0 PRECAUTIONS
3.1 Installation
This game is designed for indoor use only. It must
not
be installed outdoors.
The
following conditions must be avoided:
1.
Direct exposure to sunlight, extreme high humidity, direct water contact, dust,
high heat or extreme cold.
2.
Vibration. The game must be installed on a level surface with the platform
levelers properly adjusted.
Do not install in an area such that the game would present an obstacle in case of an
emergency (i.e., near fire equipment or emergency exists).
3.2 Handling
1.
Before operating the game, make sure that the main AC power hookup
includes a safety ground. This will ensure safe operation as well as
compliance with the applicable FCC and UL regulations. Measure the AC
power line voltage. Verify that the voltage source is between 110 and 125
VAC.
2.
Before replacing any parts, turn the AC power OFF and unplug the game.
3.
Do not attempt to repair the Printed Circuit Board (PCB) on-site. It contains
sensitive integrated circuit chips that could be easily damaged, even by the
small internal voltage of a multi-meter. Always return the PCB to your
distributor for any repairs. PCB assemblies must be returned as complete
sets.
2
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
