background image

6

  SERIAL NUMBER

The label with the serial number is located below the machine, in the underlying part of the ex-
ternal left side. That number shall be always notified for technical assistance or request of spare 
parts.

Recommendations

•  The machine is not intended to be used by persons (including children) 

whose physical, sensory and mental capacities are impaired, or with lack 
of the necessary experience and knowledge, unless they are supervised 
or instructed in its use by persons responsible for their safety. 

•  Children shall be supervised to ensure that they do not play with the ma-

chine. 

•  If the power supply is damaged, it shall be replaced by the manufacturer 

or its authorised technical assistance. 

•  Do not use the machine on slopes. 

•  Use only brushes provided with the machine or supplied by an authori-

sed dealer and/or reseller to avoid compromising safety and warranty.

•  The machine shall not be left unattended, but stored in a protected area 

to prevent the machine from being moved accidentally.

 GENERAL SAFETY RULES

This floor scrubber-dryer is easy to use; anyway, it is necessary to read the following rules carefully 
in order to avoid damages to both the operator and the machine. 

11111111

Summary of Contents for FLOORWASH 1000 Battery

























Reviews: