background image

5

  LIABILITY LIMITATIONS

Namco Manifacturing Inc. declines any responsibility for damage to people and property caused 
by:

•   Improper use of the machine or failure to comply with the instructions provided;

•   Use of the machine not in compliance with the regulations in force;

•   Use not in compliance with national safety and accident prevention laws;

•   Tampering with even a single part of the machine;

•   Incorrect installation and/or connection to the foreseen power sources or use of non-original            
     spare parts.

 

  WARRANTLY

Namco Manifacturing Inc. warrants this product against manufacturing or material defects for a 
period of two years from the date of purchase. During this period, Namco Manifacturing Inc. at its 
discretion, shall repair or replace any faulty product at no charge. However, Namco Manifacturing 
Inc. specifies that the warranty is not valid in the following cases:

•   Improper use of the machine;

•   Lack of or improper maintenance;

•   Use of non-original spare parts;

•   Damage from natural events such as earthquakes, floods, fires or accidents;

•   Tampering with or modifying the machine;

The warranty conditions neither minimise nor modify the legal provisions in force applicable to the 
sale of the product to the consumer.

The Warranty does not cover shipping costs which are borne by the customer.

Summary of Contents for FLOORWASH 1000 Battery

























Reviews: