NAMCO EXCELEENA, Instructions Manual

Page: 5 / 22

2. Precautions
(1) For indoor use only ­ do not install in the following location
① Outdoors
② Places exposed to direct sunlight, places with high humidity, dusty places, places with
leaks / water leaks, heating appliances, extremely cold places
③ Places that hinder disaster prevention such as emergency exits and places where
firefighting equipment is installed.
④ Unstable places and floors with vibration
(2)
(1) The machine can be used in the range of AC 90v to AC 11OV, but please use it near
AC 1OOV as much as possible. Also, be sure to connect the power plug with a dedicated
outlet.
(2) When unplugging the power cord, be sure to hold the plug without
pulling on
the cord.
(3) Be sure to turn off the power when replacing parts or connecting / disconnecting
the connector.
(4) Since the repair of the game PC board will be done by the manufacturer, never
check the continuity with a tester or the like. The internal voltage of the tester can
destroy integrated circuits on the game PCB.
- 3 -
In the case of an outlet with an earth, you can do the earth just by inserting the plug.
If it is not an earth 1 inch outlet, insert the included conversion plug and then connect
it to the outlet. At that time, be sure to connect the earth wire to the earth terminal of
this unit and make a ground connection.
2 - 2 Handling Precautions (Other)
2 - 1 Environmental Precautions (Other)