Page 37
7-8 Step-Lock Maintenance
7-8-1
Releasing the Step-Lock
1.
Turn the power switch ON
2.
Press the service switch, and start the game.
3.
When the game starts, the restriction plate (see diag.) moves to the
released position.
4.
When the steps are released, turn the power OFF.
5.
To re-lock the steps turn the power ON and the steps will re-lock in the
power up motor check.
7-8-2
Greasing the Step-Lock
The step-lock should be greased every three to four months.
1.
Remove the control panel and vac-forms
(See sections 7-3
and
7-4).
2.
Apply grease to the following locations.
•
Between the restriction plate and guide rails, and between the cam follower.
•
Screw shaft
•
Pillow shaft
•
Sub torsion bar axle
WARNING
Make sure that the power is turned OFF.
If work is to be carried out with the covers removed, take care not to trap
hands or fingers in the mechanism.
Summary of Contents for Alpine Racer
