Page 13
e.
Turn the power to each machine "ON", and set the PCB ID using the test mode.
(Refer to section 7-3-2 "Setting the Game Options" (page17))
Note:
Settings other than those described will cause the machine to operate
incorrectly.
6-1 Setting the Link Switches
The link switches are used to set the connection between seats and machines.
a.
Setting only one machine (2 seats)
Set the link switches to "ON", "INT", and "ON".
Note:
Do not use a link cable.
b.
Setting two or more machines.
Set the link switches to "ON", "EXT", and "ON".
c.
Install the connector cover using the
two screws (M4x10).
The link procedure is now complete.
d.
Setting for faulty PCB.
If the game PCB of only one side is faulty, set the link on that side to "OFF"
[Example of setting for faulty left side]
Summary of Contents for Ace Driver Victory Lap
Page 10: ...Page 10 4 MAJOR COMPONENTS...
Page 28: ...Page 28 9 PARTS...
Page 34: ...Page 34 10 SHEMATIC...
Page 35: ...Page 35...
