Page 72
8-12-2
Lengthwise Rear
1.
Remove 3off cap screws (M4x16).
2.
Disconnect the 3 connectors, and detach the Sensor Bracket (A).
3.
Remove 1off cap screw (M3x12), flat washer (M3) and hex nut (M3) from the
Sensor. Replace the Sensor.
5.
Reassemble in reverse order.
Note:
Ensure that the rear Prize Item Sensors have 2-pin connectors. (light
emitting)
Cap screw (M4x16)
Cap screws (M4x16)
Connectors (2-pin)
Sensor Bracket (A)
Cap screw (M3x12)
Sensor Bracket (A)
Prize Sensor
(with 2-pin connector)
Hex nut (M3)
Flat washer (M3)