Cleaning, maintenance and transport
In order to protect your product from being damage during transport;
The product has been packaged according to normal transport conditions. In order to avoid possible damage, it should always
be carried in its original package.
•
The product shall be kept in its own package in a vibration-free, dust-free environment away from abrasive orchemical
material until it isdelivered to its placeof assembly. Do not accept the products which are not in their original package or
which were opened before being delivered to you.
•
The products should be stocked into the vehicle in a way to stay motionless in case of any turn over or fall down.
•
While heavy products are being carried, use appropriate lifters to protect products or the people carrying the products.
•
All necessary measures should be taken in orderto prevent damages arising from sudden and careless lifting and putting down.
•
The products should be carried one by one carefully. They shall not be thrown or carried carelessly from hand to hand.
Aftertaking the product out of its package:
•
The delivered product should be checked.
•
The product must be checked for damage during transport. If thereis any lost or damaged part, it should immediately be
nformed to the transporter or our firm verbally or by writing.
•
Do not hold the product on its connection box or electric cables. Abstain from applications which will damage the wings or
the protective cage while carrying.
Periodic cleaning and maintenanceof the product:
•
Before cleaning or maintenance, even if the product is turned off, be surethatelectric connection has been cut from the main
power supply.
•
All electrical eqipment should be regularly controlled, connections should be checked and damaged or worn-out cables and
equipment should be replaced.
•
Periodic maintenance should be carried out at least once every six months or more frequently, depending on its frequency
of use. Maintenance and cleaning of the productshould be carried out by qualified staff.
•
Check the product regularly. In order to prevent dirt or accumulations in the wing, motor or grill, carry out the maintenance
Abnormal Situation
Possible Cause
How to Fix
Too much sound (noise)
Rotor imbalance
Change the rotor
The device is not working
Motor is damaged
Change the motor
Condensator is not working
Change the condensator
Faulty speed adjustment connection
Check the installation (assembly)
The device is rotating slowly
Faulty connection
Check the electrical connection
Defects and How to Fix Them:
•
Be sure that the cable and electric connection box are closed correctly and do not admit water leakage.
•
Air exit direction should be in the direction indicated with the label on the body. There shall not be any obstacles in the air
flow route.
•
The wings should rotate in the correct direction.
•
While the product is operating, there shall not be any vibration or internal rubbing or hitting voice due to the rotation of
the fan or the suction fan.
•
Power supply, current and frequency values shall comply with the product label.
•
If any electricity warning device turns on, electric connection should immediately be cut from the main power supply. Before
starting the product, all the installation should be controlled again carefully.
•
If any problem occurs, please consult authorized persons.
•
In case of any defect after you have started using the product continuously, the type of defect should be determined.
In order to remove the defect, the technical service must be contacted. You must not try to fix the problem yourself.
ALNOR
®
systemy wentylacji
jest prawnie chronionym znakiem i technicznym patentem. Prawo do zmian zastrzeżone.
12
w
w
w
.v
ent
ila
tio
n-
al
no
r.co
.u
k
User manual
DV-ROF-V
