5
2. Insert the 6 AA batteries to the case as indicated by the polarity symbols marked
inside the case.
Fig.5
3. And then push the battery cover to the batter cavity. A KATA tone will be heard,
which means the battery cover has been at the right position. Please note that the
direction indication of the “UP” on the battery cover. 6 alkaline batteries will last
approximately 40 hours. If you won’t use the detector for a long time, please
remove the batteries from the battery box.
PANEL AND LCD
All the controller adjustment can be displayed on the LCD, and all the detection
result also can be shown on the LCD. (See Fig.6)
Fig.6
Target ID: It’s located above the LCD screen. It indicates the wanted target metals.
When detecting a metal target, the target ID cursor will appear below such metal
patterns or the words.
Target ID cursor: it’s in the shape of
.It consists of 3 segments. When the
target ID cursor is lighted, it indicates the probable metal type of the detected
target.
The three warning tones which be heard during finding targets are corresponding with
the target ID cursor. See the below table:
Low pitch
Median
High pitch
IRON
5
¢
,
10
¢
,25
¢
,50
¢
and
1
$
Summary of Contents for MD030
Page 1: ...MD030 User Manual...
Page 16: ...15...