CAUTION
1. In heavy traffic area, please do not wear earphone, in case an accident.
2. Keep away from the region where may bury the electrical line, cable line or
pipeline, in particular, the pipes that are full of flammable gases and liquids. Do
not
detect in the military area where may bury bombs or gas explosives.
3. When excavating the target, use the reasonable method, don’t destroy the
vegetation. After the excavation, the ground surface should be restored. A sand
bucket can be used to get objects in the water.
4. If there are 2 detectors in your detection area, they shouldn't be very close to
each
other, which will cause mutual distress. In this case, you should reduce sensitivity
or keep 2 detectors away from each other for more than 10 meters.
Maintenance
The metal detector is specially designed as a waterproof detector. The following
suggestions will help you maintain the metal detector for long time use.
1. Do not open the front and back cover of the control box. The control box adopts
special waterproofing measures. Do not open it with any special tools, as it will
affect its waterproof function seriously.
2. Don't open the earphone. The waterproof measures of the earphone are installed
in
the buzzer, after using in water. It is normal if there is water in the headphone
box,
and it will not affect its waterproof performance. As long as the earphones are
erected, the water will get out.
3. Do not cut the sheath of the cable, otherwise, it will affect the waterproof
performance.
4. After using at the seaside, rinse with water and dry it with a dry towel. It is
forbidden to use hand sanitizers or detergents to clean detectors.
5. When not in used, stored it in a dry place.
11
