NAL A3LA-R, User Manual

Page: 72 / 158

A3LA-R User Guide Version A
Document Number: 451-93156-001A 72 of 158
B.72 –MSVTR – DTMF R
ECEIVED IN
V
OICE
C
ALL
Set Command: –MSVTR=[<mode>]
Disable or enable the receiving of DTMF messages from the network.
<mode> takes one of the following values:
0 Receiving of DTMF disabled (default)
1 Receiving of DTMF enabled
If receiving DTMF is enabled, the A3LA-R/RM/RGS sends the following unsolicited
result code every time a DTMF inband signaling data is received from the network
while in a voice call:
–MSTRX: <tone>,<event>
where <tone> is the DTMF tone received (‘0’-’9’, ‘#’, ‘*’, ‘A’-’D’) and <event> can be
one of the following:
0 tone stopped (i.e. key released)
1 tone started (i.e. key pressed)
Read Command: –MSVTR?
Query the current parameter settings. The response is in the form:
–MSVTR: <mode>
Test Command: –MSVTR=?
List the supported parameter settings. The response is in the form:
–MSVTR: (supported <mode>s)
B.73 –MSVLS – L
OCAL
DTMF F
EEDBACK
S
ELECTION
Set Command: –MSVLS=[<mode>]
Disable or enable playing of DTMF tones locally (i.e. feedback tones) while in a voice
call.
<mode> takes one of the following values:
0 No mute. Play all DTMF tones (default) when pressed or received while in
voice call.
1 Enable mute mode. Mute both pressed or received DTMF tones while in
voice call.