SHOUT nano 100 User Guide Version A
Document Number: 451-22013-001A
16 of 44
3.3
C
HARGE
D
EVICE
The SHOUT nano 100 ships with a partially charged battery. Before use, charge the SHOUT
nano 100 for one (1) hour. NOTE: Upon battery depletion, the SHOUT nano 100 should reach full
charge within three (3) hours when continuously plugged in.
Plug the wall charger into a 115 Volts (Alternating Current) (VAC) power source.
Confirm that power applied to the SHOUT nano 100 USB-C port.
A charging icon appears in the battery icon, as shown in Figure 7.
Figure 7: Battery Charging Icon
3.4
P
RE
-C
ONFIGURATION
S
ETTINGS
The SHOUT nano 100 ships with the default settings noted below:
Report Rate: five (5) minutes
Emergency Report Rate: five (5) minutes
Transmit Report Without GNSS Fix: Yes
Message Format: NAL Message Format Version 6
If you want to change these default settings, the SHOUT nano 100 supports a USB-C
connection to a computer with SatTerm software (or any terminal emulator software) to
configure its operating profile using NAL Research’s defined AT commands. Find these AT
commands in the NAL manual AT Commands for Model SHOUT nano 100 [1]. NOTE: the Report
Rate can also be changed from the SHOUT nano 100 Home>Configuration screen.
The required hardware and software to configure the SHOUT nano 100 include:
A desktop or laptop computer (not provided).
A USB-A to USB-C cable (provided with the SHOUT nano 100).