1. Open the quick release lever by hinging it open fully.
1. Locate the pedal with an “R” stamped into the end of the pedal axle,
which indicate it is the right pedal. The right pedal goes on the crank on
the right side of the bike. The remaining pedal with an “L” stamped
into the end of the axle, is the left pedal. The left pedal goes on the crank
on the left side of the bike.
2. The right pedals threaded to tighten by turning clockwise. The left
pedals reverse-threaded and tightens counterclockwise. Carefully thread
the pedal onto the crank by hand slowly.
3. Further tighten with the supplied double open-end wrench. Do not
cross thread or damage the threads.
Step Eight: Install the pedals
Step Nine: Install the seat