manualshive.com logo in svg

NAKTO Classic, Assembly Instructions Manual

Share
Download
NAKTO Classic Assembly Instructions Manual Download Page 2

Let’s start assembling your NAKTO  Classic  ebike!

(Please read this entire assembly manual before assembly as it will save 

you a lot of time!)

Step One: Unpack the ebike.

1.Pull the frame and all parts (charger, seat, toolkit, keys, nut caps and 

pedals) out of cardboard box. Separate bike from foam padding. Cut off 

all zip ties with scissors while being extra careful as not to damage the 

paint or cut any wires or cables.

Notice: 

Keep the spare fuse in a safe 

place.It is not used for assembly and will be used for the replacement if 

the original fuse were damaged.

Ensure all the following pieces are included with the Nakto Classic.

Assembly Instructions: Classic

Tools included:

Screwdriver, Phillips & Slotted 2 in 1

                                 Double open-end wrench, 13mm/15mm

                                 Allen wrench, 5mm

                                 Allen wrench, 6mm

Tools needed: 

Scissor       

                               Bike pump

Summary of Contents for Classic






























Reviews:

No comments

Brands by name

Popular brands

Load more brands