Nakayama WB2000, Manual

Page: 7 / 14

EN
WWW.NAKAYAMATOOLS.COM
7
Use
• Insert the plug into the socket
• Set the on/off switch to position II, and the device starts to heat up for application.
• After use, set the switch to position I to cool down the device.
• To turn off the device, set the switch to position 0.
Heat Gun with optional accessories
This device can also be used as heat gun with optional nozzle attachments(Fig 11,12,13,14) for some applications:
ICON DESCRIPTION PURPOSE
Glass protection nozzle Protection windows when stripping frames
Spoon reflector nozzle Soldering pipes
Cone nozzle Welding, shrink sleeving (heat concentrated over small area )
Fish tail surface nozzle Drying, thawing (heat spread over wider area )
Scraper Stripping paint and varnish
WARNING! A fire may result if the appliance is not used with care, therefore
● Be careful when using the appliance in places where there are combustible materials;
● Do not apply to the same place for a long time;
● Do not use in presence of an explosive atmosphere;
● Be aware that heat may be conducted to combustible materials that are out of sight;
● Place the appliance on its stand after use and allow it to cool down before storage;
● Do not leave the appliance unattended when it is switched on.
2: BBQ / Fireplace Charcoal Lighter (Fig. 17)
The BBQ and fireplace lighter is always to be used without the extension handle. Remove the extension handle by pressing and releasing button (5) and
pulling the extension handle from the device.
Use:
• Attach the BBQ / fireplace charcoal lighter nozzle (10) onto the device.
• Select temperature setting II.
• Place the nozzle under the coal or the wood.
• Ensure that the device is properly positioned. The kickstand(3) could be used for firmly support the device in the proper position.
• Insert the plug into the socket.
• Check to ensure the nozzle is not blocked before turning the device on.
• Remove the device from the coals or the wood as soon as it starts to glow.
• Now blow hot air into the coals or wood from a distance of around 5-10cm, until the coals or wood is burning properly.
• Doing this will help to avoid damaging the nozzle attachment. Exposing the nozzle to high temperatures for a prolonged period of time could cause the
material to melt. Please follow these instructions to achieve long-term enjoyment with the product.
Watch Out! To avoid overheating of the BBQ or Fireplace do not use the device for longer than necessary.
- ensure that the firelighter is properly positioned;
- unplug the firelighter before removal from the fire;
- allow the firelighter to cool before storage;
- do not allow the hot parts of the firelighter to touch the cord or other flammable materials