Nakayama Pro PB7300, Manual

Page: 4 / 17

WWW.NAKAYAMATOOLS.COM
2
EN EN
WWW.NAKAYAMATOOLS.COM
3
Things To Check Before Using Your Hedge Trimmer
a. Before beginning work, look around carefully to get a feel for the shape of the land, or grass to be trimmed, and whether or
not there arc any obstacles which might get in the way while working, and remove any obstacles which can be cleared away.
b. The area within a perimeter of 1 Sqm of the person using the brush cutter should be considered a hazardous
1. Make sure the appropriate blade cover is in place.
When transporting by car, fix the unit firmly using a rope. Do not transport by bicycle or motorbike because it is dangerous.
2. Never transport the brush to over rough roads over long distances without first removing all fuel from the fuel tanks, as
doing so might cause fuel to leak from the tank.
Operation Safety Precautions
1. Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle to the idling posi -
tion.
2. Always be sure to maintain a steady even posture while working.
3. Maintain the speed of the engine at the level requires to perform cutting work, and never raise the speed of the engine
above the level necessary.
4. If the grass gets caught in the blade during operation, or if you need to check the unit or refuel the tank, always be sure to
turn off the engine.
5. If the blade touches a hard object like a stone,immediately stop the engine and check if something is wrong with the blade.
If so, replace the blade by new one.
6. If someone calls out while working, always be sure to turn off the engine before turning around.
7. Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an elec -
trical shock.
8. Never touch the muffler, spark plug or other metallic parts of the engine while the engine is in operation or immediately
after shutting down the engine. Do so may result in serous bums
9. When you finish cutting in one location and wish to continue work in another spot, turn off the engine and turn the unit as
the blade face away from your body.
Maintenance Safety Precaution
a. Perform the maintenance and checking operations described in this manual at regular interval. If any parts must be re -
placed or any maintenance of repair work not described in this manual must be performed, please contact a representative
from the nearest authorized servicing dealer for assistance.
b. Under no circumstances should you never take apart the brush cutler or after it in any way. Doing so might result in the
brush cutter becoming damaged during operation or the brush cutter becoming unable lo operate properly.
c. Always be sure to turn off the engine before performing any maintenance or checking procedure.
d. When sharpening, removing, or reattaching the blade proper tools and equipment to prevent injury.
e. When replacing the blade or any other parts or when replacing the oil or any lubricants, always be sure to use only products
or products which have been certified by for use with the brush cutter.
Set Up
Engine And Main Parts
Align the hanger and the fuel tank using attached 4 bolts secure the connection firmly with equal
force. (F1)
(1) Fuel tank
(2) Bolt
(3) Main pipe
Handle
1. Loosen the 4 bolts on the handle bracket. (F2)
2. Insert the right handle (throttle lever is attached) and the left handle assembly into the bracket
and tighten the bolts securely. (F2)
(1)Handle bracket, (2)Right handle, (3)Bolt, (4)Left handle, (5)Engine
side.
Safety Guard
Attach the safety guard to the gear case and fix it with the clamp and 2 bolts M5x25 securely (F3).
(1) Bolt (2) Clamp
(3) Main pipe (4) Safety guard