Nakayama PRO NP2035, Manual

Page: 2 / 35

EN
WWW.NIKOLAOUTOOLS.GR
2
SAFETY INSTRUCTIONS
• In order to operate the equipment safely, the users shall carefully read and understand the instructions before the first application.
• The users shall obey all safety instructions. Otherwise, you and others may suffer from injury.
• You shall preserve all application and safety instructions for the further reference. The equipment shall be used when it has normal functions.
• Please use the equipment according to the safety and technical requirements as specified in the instructions.
• The semi-stationary and static form of the equipment is designed to be transferred to the house and garden: Spray water and make watering.
• The equipment shall be used within its performance range. Please don’t use the equipment which has abnormal switch.
• The equipment is prohibited to be used for providing water or conveying food.
• Please don’t use the equipment in areas which contain flammable and combustible liquid or gas.
• When the components which fail to be tested and recognized by manufacturers are improperly used, the equipment is likely to suffer from the unforeseen
damage.
• Any application which deviates from the intended purpose as specified in the instructions will be considered as the unauthorized application, as a result, the
generated problems are independent of the manufacturers.
• Please ensure that the closed equipment will not be started again by mistake.
• The equipment shall be connected to the socket which has correct installation and grounding.
• The fuse wire shall serve as the current circuit breaker when the residual current exceeds 30mA.
• Please ensure that the power supply can satisfy the connection regulations before the equipment connection.
• Please don’t bend, extrude, pull or drive the power wire to avoid the related dangers caused by line breakage.
• Please check the plug and power cable before application. When the power cable has been damaged, please disconnect the plug immediately. Please don’t
use the equipment if its power line is damaged.
• When the equipment is idle, please ensure that the plug has been pulled out. Meanwhile, the equipment has been closed, then, unplug the power supply.
Technical Data
Model
NP2035
Voltage/frequency 230V / 50Hz
Rated power 800W
Max. height 38m
Max. suction height 8m
Max. conveying amount 3500 L/h
SPECIFICATIONS
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice
unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of
the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and
may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work,
including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of
the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause
malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting
from the use of non-conforming equipment.
WARNING! READ THROUGH THE INSTRUCTIONS FOR USE BEFORE STARTING UP THE EQUIPMENT. Failure to follow all instructions listed below,
may result in electric shock, fire and /or serious personal injury. Persons, who are not familiar with the instructions, may not operate the
equipment. Keep the instructions for use in safe custody. Children and youths are not permitted to operate the equipment.
Danger: In order to avoid any mechanical force or tension, the suction
pipeline shall be installed. When the transmission pipeline is polluted,
please apply filter to make cleaning and protection.
Attention: We advise to install one check valve to avoid the equipment
shut-down which is caused by water absence during pumping.
Risk of injury: When the components are unable to withstand the
compression or the installation is incorrect, the pressure pipeline is
likely to burst during the operation. Risk for liquid ejection!
Attention: The equipment is only used for industrial water supply,
such as toilet and washing machines and shall not be used for the
drinking water supply.
Risk of electric shock: Please don’t operate the equipment in a humid
environment.