Nakayama PRO MB6100, Manual

Page: 7 / 29

EN
WWW.NAKAYAMATOOLS.COM
7
Intended use
Description of main parts (Picture A1 - Page 2)
balance.
Operation
1) do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect;
2) work only in daylight or in good artificial light;
3) always be sure of your footing on slopes;
4) walk, never run with the machine;
5) for wheeled rotary machines, work across the slopes, never up and down;
6) exercise extreme caution when changing direction on slopes;
7) do not work on excessively steep slopes;
8) use extreme caution when reversing or pulling the machine towards you;
9) do not change the engine governor settings or over-speed the engine;
10) start the engine carefully according to manufacturer instructions and with feet well away from the tool(s);
11) do not put hands or feet near or under rotating parts;
12) never pick up or carry a machine while the engine is running;
13) stop the engine:
- Whenever you leave the machine;
- Before refuelling;
14) reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve,turn the fuel off at the conclusion of working;
Maintenance and storage
1) keep all nuts, bolts and screws tight to ensure the equipment is in safe working condition;
2) never store the equipment with petrol in the tank inside a building where fumes can reach an poor flame or spark;
3) allow the engine to cool before storing in any enclosure;
4) to reduce the fire hazard,keep the engine,silencer,battery compartment (not included with all models) and petrol storage area free of vegetative material
and excessive grease;
5) replace worn or damaged parts for safety;
Safety label locations
These labels warn you of potential hazards that can cause serious injury. Read the labels and safety notes and precautions described in this manual carefully.
If a label comes off or becomes hard to read, contact your dealer for a replacement.
EXHAUST CAUTION
HIGH TEMPERATURE PART
DO NOT TOUCH!
Read the instructions
carefully.
CUTTING
DANGER!
The micro-tiller is suitable for cultivating the sandy soil and clayey soil of canopied vegetables base and dry land and slopes with gradient less than 10%.
For weedy and deep plots, remove the weeds before using the micro-tiller to cultivate the land.
(1) Frame serial number
(2) Fuel tank
(3) Transmission oil filler cap
(4) Mud fender
(5) Wheel
(6) Drag bar
(7) Connecting bar
(8) Handle bar
(9) Throttle control
(10) Handle height adjuster
(11) Safety bar
(12) Engine switch
(13) Clutch
(14) Shift level
(15) Belt cover
(16) Blade