Nakayama Pro EH7750, Instructions Manual, Page: 3 / 40

WWW.NIKOLAOUTOOLS.GR
3
Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is
maintained.
Special safety instructions
- Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
- Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device
cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
- Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.
- Switch off the machine and disconnect the plug from the power supply when the machine is left unattended, maintenance is being carried out, for
cleaning, blade oiling or when the blades are blocked or any object to be removed from the blade.
- Make sure that the protection guard is always mounted to the machine when using the hedge trimmer. Never remove any of its components and never use
a damaged or incomplete machine and never modify any of the machine components or tamper with the original trimmer arrangement in any way.
- The use of a circuit is required for machines for outdoor use. The machine has to be connected to socket outlets with earth contact.
- Only use splash proof extension cord approved for outdoor use and marked accordingly.
- Make a loop in the extension cord and hang into the cable holder as shown in (6).
- Before using the hedge trimmer, check the machine, extension cord and plug. If any components are worn or damaged, have them checked, repaired or
replaced by an authorized service centre.
- Remove the plug immediately, if the cable or extension cord has been damaged or cut.
- Always wear suitable clothing, anti-slip shoes and close-fitting garments, which cannot get caught, however, do not restrict movement. Tie long-hair back
or protect with a hair net. Do not wear bracelets or long jewellery, which could get entangled in moving parts.
- Always wear safety goggles or a face guard, protective gloves and, if the noise exceeds 85 dB (A), also wear ear guards.
- Do not use the machine when it is raining or on wet hedges.
- Individuals below the age of 16 and individuals, who are not perfectly familiar with the instruction, are not allowed to use the machine.
- Within the working area, the person using the machine is responsible for any damage or injury sustained by third parties or their property which has been
caused by the machine. Watch your working area and do not allow third persons or animals to be around.
- When operating the machine take great care and always hold it firmly with both hands. Chose a stable and safe position, especially on steps.
- Check regularly that all screws are properly secured. Check the cutting blades regularly and, in case of damage, have them repaired of exchanged by an
authorized service centre.
- Make yourself familiar with your working area and be alert for possible hazards, which you might not her due to the motor noise.
- Never touch the unprotected blades and never carry the machine taking hold of the blades.
- When the hedge trimmer is not in use, for transport or storage, keep it in a dry place and out of the reach of children, and have the cutting blades always
inserted into the protection cover.
- Only use original spare parts and accessories supplied with the machine or recommended by the manufacturer.
- To check the hedge for foreign objects, e.g. wire fences.
- Use a residual current device with a tripping current of 30mA or less .
- To hold the hedge trimmer with both hands.
EN
WWW.NIKOLAOUTOOLS.GR