Safety decal
Should this decal become unreadable after being worn, faded, or otherwise damaged during operation, order a replacement
decal
from your local
authorized dealer.
Technical Data
Model
MB2510
Displacement
52
cc
Horsepower
2.2
hp
Cutting width
30 cm
Includ
es
4 Cutting blades
UNPACKING AND ASSEMBLY
*
The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the
manufacturer's product line with similar features and may not be included in the product you just acquired.
*
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments,
must only be carried out by technicians of the authorized service department of the manufacturer.
*
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Unpacking the cultivator
Carefully lift the mini cultivator out of the box, remove any packaging
material and cut any ties holding the handlebar pieces to the cultivator
assembly.
Assembly
1. Place the cultivator upright with the tines and wheels on a clean and
level surface. Wheels should be set in the lowest position. DO NOT
place the cultivator on a high surface from where it can fall and cause
damage or injury.
2. Attach the lower bar and place the bolts (46141) and the nuts
to hold
the handlebar in place.
3. Using two tee handle nuts (4640) and two bolts (4642), attach the middle
handlebar (4693) to the lower handlebar (4695) that is already
attached to the cultivator. The middle handlebar can be installed in two
positions one high and one low. DO NOT overtighten the tee handle
nuts.
4. Before assembling the up
p
er handle, attach the lever (4659) first
and
then attach the upper right and left handlebars (4689 & 4690) to
the middle handlebar using the two remaining tee handle nuts, bolts,
and curved washers. DO NOT overtighten the tee handle nuts.
EN
WWW.NIKOLAOUTOOLS.GR
4
Summary of Contents for MB2510
