background image

 

 

 

 

 

Safety Instructions 

WARNING 

Read and understand all instructions. Save these instructions. Failure to follow all instructions listed below may 

result in electric shock, fire and/or serious injury. The term ‘power tool’ in all of the warnings below refers to 

your mains-operated (corded) power tool. 

 

Intended Use and Reasonably Foreseeable Misuse: 

The Lawn mower is intended to be used only for mowing domestic lawns. The Lawn mower has been designed 

for use only in private gardens and is not  suitable for use in public grounds, parks, sports fields  or for 

agricultural or forestry purposes. Only mow the lawn when the grass is relatively dry. 

Any other use of the lawn mower is considered inappropriate use. The manufacturer shall not be liable for any 

damage or injury resulting from misuse. 

Only the manufacturer’s approved replacement parts  and blades are to be used on the machine.  Structural 

modifications or use of components not approved by the manufacturer will void the warranty and absolve the 

manufacturer of any liability. 

Even with the intended use of the lawn mower there is always a residual risk, which cannot be eliminated. 

According to the type and construction of the lawn mower the following potential hazards might apply: 

- Ejection of stones etc. from the cutting area (Cutting / injection hazards) 

- Injury from the exposed blade during maintenance (Cutting hazar) 

- Electric shock on contact with non-insulated electric components, 

- Loss of hearing If suitable ear protection is not worn 

 

Warning: 

The actual level of vibration while using the lawn mower may differ from the level specified in this 

manual by the manufacturer. The following factors may affect actual level of vibration: 

- correct use of the lawn mower 

- proper maintenance of the lawn mower 

- selected height of cut 

- sharpness and balance of blade 

Make a work plan so that your exposure to vibration can be limited. 

If you experience an unpleasant sensation or skin discoloration while using the lawn mower, immediately stop 

working. Take sufficient work breaks to prevent hand-arm vibration syndrome. 

Maintain the machine in accordance with the instructions in the manual. 

Do not use of the lawn mower at temperatures below10 °C.. 

 

1. Training 

• Read the instructions carefully. Be familiar with the controls and the correct use of the machine. 

• Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can 

restrict the age of the operator. 

• Never operate the machine while people, especially children, or pets are nearby. 

• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or 

their property. 

 

Summary of Contents for EM4200













Reviews: