17
WWW
.N
AKAYAMA
T
OOLS
.
COM
9 MAINTENANCE
Note: To ensure long and reliable service, carry out the following
maintenance regularly.
•
Check for obvious defects such as loose, dislodged or damaged blade, loose fixings and worn or damaged
components.
•
Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs
before using.
•
If the machine should happen to fail despite the care taken in manufacturing and testing, repair should be
carried out by our technical department.
9.1 Blade maintenance
Always clean the cutting blades after operation and lubricate with oil.
During longer cutting jobs, we recommend periodically lubricating the cutting blade.
Visually check the condition of the cutting edges of the cutting blade.
Ensure that the blade is covered with the blade guard supplied when not in use.
9.2 Cleaning/ storage
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water,
solvents or polishes.
Remove all debris, especially from the ventilation slots. Store the
machine in a secure dry place out of reach of
children.
Do not place other objects on top of the
machine.
9.3 Service department
•
Damaged switches must be replaced by our after
-
sales service department.
•
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is
available from our service department. Replacement of the connecting cable must only be carried out by our
service department (see last page) or by a qualified person (qualified electrician).
10 TECHNICAL DATA
Battery type Li
-
Ion
Battery Voltage 7.2V
Battery Capacity 1500mAh
Charging time (empty battery) 3
-
5h
Hedge trimmer: Cutting length 120mm
Hedge trimmer: Cutting width 6mm
Grass shear: Cutting width 83mm
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 81 dB (A)
Acoustic power level LwA 90 dB (A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB
(A).
Aw
(Vibration) 2.2 m/s² K = 1,5 m/s²
12 SERVICE DEPARTMENT
•
Damaged switches must be replaced by our after
-
sales service department.
•
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is
available from our service department. Replacement of the connecting cable must only be carried out by our
service department (see last page) or by a qualified person (qualified electrician).
