Nakayama EB1000, Manual

Page: 4 / 26

4
WWW
.N
AKAYAMA
T
OOLS
.
COM
1. whenever the machine is left unattended;
2. before clearing a blockage;
3. before checking, cleaning or working on the machine;
4. after striking a foreign object;
5. Whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
Maintenance and storage
a) Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or
removable battery) before carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended replacement parts and accessories.
c) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach of children.
Recommendation
The machine should be supplied via a residual current device (RCD) with a tripping current of not more than 30 mA.
Intended Use
This unit is designed to be used in accordance with the descriptions and safety instructions indicated in this operating manual
- For private use
- For trimming lawn edges and small inaccessible areas of grass (e.g. under bushes)
- For cutting wild growth, shrubs and undergrowth.
It is not permitted to use this unit for any other purposes.
The user is liable for all injuries to third parties and damage to their property.
Operate the unit only in the technical condition as stipulated and delivered by the manufacturer.
Arbitrary changes to the unit will exclude the manufacturer from any liability for resulting injury and/or damage.
Technical Data
Voltage/frequency:
110V/230V
～
50Hz/60Hz
Input power: 1000W
No-load speed: 7300rpm (trimmer), 11000rpm (brushcutter)
Cutting width: 38CM (trimmer), 23CM (brushcutter)
Line diameter: 2mm x 6m
Split Steel Shaft Diameter: 22mm
Inner Guard: Aluminum
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior
notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated
in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line
with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty
will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement
work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.