Nakayama EB1000, Manual

Page: 12 / 26

12
WWW
.N
AKAYAMA
T
OOLS
.
COM
WARNING!
Never use non-recommended cutting attachments and appropriate guards and their location. The non-approved cutting
attachments may cause serous injure during working.
Fig.18
Replacement of the line spool ( Fig. 19 & Fig.20)
• Unplug from the socket.
•
Turn upside down the machine with the guard facing upwards.
•
Loosen the knob (a) by turning it in clockwise direction (viewed from above) and remove it.
•
Remove the empty spool (b) and clean the inside of the spool holder carefully removing all dust and grass residues.
•
Insert now the new spool in the spool base and push the end of line (d) through the lateral holes (c).
• Put the knob (a) on and fasten it securely by turning it in counterclockwise direction (viewed from above).
• Re-establish the length of the line by pushing the knob of cutting head and pull the line ends out to the desired length.
Fig.19 Fig.20
CAUTION! Under no circumstances wind extra line on the empty spool but instead replace it with a new one, the same as
the original. The use of line with different characteristics to those of the original can permanently damage the grass
trimmer as well as annulling the terms of the guarantee.