EN
12
Air Cleaner
AIR CLEANER
I. Double-core type
Dismantle the air cleaner housing and check ité filter element, make sure it is clean and
intact, otherwise clean or replace it .
II
.Single-core type
The air cleaner housing and check its filter ele-ment, make sure it is clean and intact, oth
-
erwise clean or replace.
III. Dust-collecting type
I. Dismantle the dust-collecting hood and check the filter element of the air cleaner; make
sure it is clean and intact ,otherwise clean or replace.
2. Check whether there is any dust or dirt inside the dust-collecting hood, if any, clear away.
IV. Oil bath-type
1. Dismantle the air cleaner housing and check its core, make sure it is clean and intact,
otherwise clean or replace.
2. Check oil level and oil quality. If the oil level is too low ,add the recommended engine oil
up to oil level mark.
CAUTION:
Never run the engine without an air cleaner, or severe wear of the engine may occur.
Filter element
Dust-collecting hood
Air cleaner cover
Foam
Steel cotton
Oil level mark
Air cleaner housing
Filter element
Air cleaner housing
Filter element
(Only for
non-sound type)
