Nakayama 032861, Manual

Page: 5 / 18

EN
WWW.NAKAYAMATOOLS.COM
4
Urgency stopping engine: Set the stopping switch to OFF position or directly pull out the spark plug. Correct stopping the
engine is: First remove load, idle run 2-3 minutes, then, set the stopping switch to OFF position or directly pull out the spark
plug, the machine will stop at once.
Don’t directly stop the engine without removing load in normal condition.
1. Choke
2. Set choke to off
position
Figure 7-6
Stopping the engine
When running engine, keep yourself far away from the muffler and don’t face exhaust outlet for your health. Pay attention to
abnormal state of the engine in the running. If finding abnormal sound, grate vibration, serious traveling and firing gun, etc.
stop the engine at once.
Figure 7-7
Stop Switch
Figure 7-8
1. Throttle Switch handle
2. Close position of the throttle Switch
3. Carburettor Drain Bolt
Adjustment of the gasoline engine
Each gasoline engine has been strictly tested and inspected in our factory, general, the machine can normally run without any
adjustment. After operating some time, adjust to gasoline engine as following procedure if necessary:
Filler
Valve
Valve Lock Nut
Rocker
Valve gap adjusting nut
For increasing valve gap, screw out the
nut.
For decreasing valve gap, screw up the
nut.
Figure 7-10
Figure 7-9