Nakayama 032861, Manual

Page: 4 / 18

EN
WWW.NAKAYAMATOOLS.COM
3
Check air cleaner
Air cleaner has two types of the semi-dry and oil bath. Check whether air cleaner is clean and foam shall be free from dust.
First using oil bath air cleaner, filling clean machine oil level (oil level marked on the outer case of oil bath air cleaner) should
be flushed with oil level of the air cleaner outer case. Clearly see safety and warning appliqué before starting.
1. Oil Dipstick Hole
2. Highest Oil level
3. Lowest Oil Level
Figure 7-2
Check fuel level:
Open the fuel tank cover and check the fuel level.
If the level is too low, add the fuel from filling-hole
till the oil level reaching the red stop plate inside of
the strainer. Our recommended fuel brand is stand-
ard gasoline (unleaded gasoline is as standard). Do
not mix the gasoline with the engine oil. Do not use
the gasoline with foreign materials.
Figure 7-3
1. Fuel tank 2. Hole 3, Red basic line for upper fuel
level
1. Butterfly nut, 2. Air cleaner cover, 3. Butterfly nut
4. Paper filter-element, 5. Foam filter element, 6. Gasket
7. Cleaner base plate.
Figure 7-4
Starting the Engine
a. Open the throttle switch, close the choke, adjust the throttle valve to proper
position, first, slightly pull the starting handle till feeling a little resistance, then
pull forcefully to start the gasoline engine.
b. After starting, let the engine run 1-3 minutes at idle speed, meanwhile, check
the engine working condition whether it runs stably or smoothly and there is
any abnormal noise, then open the choke to maximum and adjust the throttle
opening to obtain required speed. To the present, the starting process is com-
pletely over.
1. Throttle Switch
2. Open Position of the Throttle Switch
3. Drain plug
4. Pulling Cable Assembly
Figure 7-5