4
WWW
.N
AKAYAMA
T
OOLS
.
COM
Product Operation
• Setting up
1. Take the specially backpack, put the electric pruning shear into the holster and put the battery into the battery bag.
2. First, align the power cable connector's input connector jack connects to the control housing's output connector jack on
the work vest. Then, control housing's input connector jack connects to the battery's output connector jack.
3.Remove the pruner from the holster, switch ON the battery, to power On position, Due to the first time usage that the
control housing gets power, it will buzz for 2 times, double click the trigger, the pruner blades will automatically open.
4. Normal pruning:
press trigger to close the blades and release the trigger to open blades.
Switch blade opening:
continue to press the trigger, one buzz means the blade will open to small- 30mm. continue press the
trigger, two buzzes means the blades will open to big 45 mm.
Blade closure:
continue to press the trigger, a continual buzz means the blade will stay closed.
Switch off the buzzer sound:
If the connected to the control box and you are using the USB connector to charge a mobile
phone or other device, it will have a continuous buzzer sound, press the trigger and let it buzz for 3 times, the buzzer sound
will turn off.
5.
Before operation, in order to see if the pruner functions well, please press the trigger to close and release the trigger to
open the blades without cutting anything. Repeat this for a few times.
Failure Tips
Buzzer Sound Frequency
Times
Failure
Solution Method
1
battery capacity failure
check if battery capacity is low
2
communication failure
check if every part of cable connector is loose
3
blade failure
oil on blade (see P14)
4
motor phase loss
send it to local dealer for
maintenance
5
motor phase line short-
circuit
check if cable or head of the connecfor has
short —circuit caused
6
Control Housing failure
send it to local dealer for maintenance
Packing up
1. Press the trigger and hold for a few seconds and then release, the blade will close and will not open.
2. Switch off the battery, disconnect the power cord from battery.
3. Tidy up, clean up and pack the pruner into the tool box.
Battery Charging
It is recommended to charge new battery before the first use of the electric pruning shear. To charge the battery, ensure the
battery power switch is in OFF position. Plug the battery charger output into the battery charging jack then plug the charger
into a power socket. The LED indicator on the battery will turn RED during charging and turn GREEN when the battery is fully
charged.
