Nakayama 000495, Manual

Page: 29 / 41

29
WWW
.N
AKAYAMA
T
OOLS
.
COM
3. Turn the engine switch to ON.
(1) ON
(2) ENGINE SWITCH
4. Move the throttle lever slightly to the right.
(1) THROTTLE LEVER
5. Pull the starter grip lightly until resistance is felt then pull briskly.
CAUTION : Do not allow the starter grip to snap back against the engine. Return it gently to prevent
damage to the starter.
(1) STARTER GRIP
6. As the engine warms up, gradually open the choke.
(1) CHOKE LEVER
(2) OPEN
·
high altitude operation
At high altitude, the standard carburetor air–fuel mixture will be excessively rich. Performance and
fuel consumption will increase.
High altitude performance can be improved by installing a smaller diameter main fuel jet in the
carburetor and readjusting the pilot screw. If you always operate the tiller at altitude higher than
1,830m (6,000 feet) above sea level ask your authorized dealer to perform these carburetor
modifications.
Even with suitable carburetor jetting, engine horsepower will decrease approxi-
mately 3-5% for each 305m(1,000 feet) increase in altitude.
The affect of altitude on the horsepower will be greater than this if no carburetor modification is
made.
CAUTION : Operation of the tiller at an altitude lower than the carburetor is jetted for may result
in reduced performance, overheating and serious engine damage caused by an excessively lean
air/fuel mixture.