manualshive.com logo in svg

Nakanishi KOLEC FX15WT, Instruction Manual

Share
Download
Nakanishi KOLEC FX15WT Instruction Manual Download Page 30

4. Handling Procedure

Traveling backward

Traveling forward

Traveling form

Set the forklift in transfer form.

Traveling forward (toward the handle)

(1)

      

      

(2)

　

  

27

Move the forklift by pulling the vehicle body,
instead of pushing it.
To move the forklift backward when inserting
the fork into a pallet, etc., run the forklift at a
low speed that enables the operator to slowly
and securely handle it.

Raise the fork to a height of 10 to 15 cm from the floor.
When a cargo is loaded, tilt the mast backward to stabilize the cargo.

Turn the handle to the traveling position.
If the handle position is low or high, the brake is activated so that
the forklift does not run.

If the traveling knob attached to the steering handle is turned to the
front (toward the operator’s position), the forklift travels forward.

Turning the traveling knob widely increases the traveling speed.
Once the traveling knob is released, it will return to the neutral position.
The traveling knob is attached to both sides of the steering handle.

Traveling

Braking position 

Traveling 

position 

Braking position 

Summary of Contents for KOLEC FX15WT





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands