background image

15

English

(1) Connect the 

ȭ

6.0mm Air Hose to the Primary Joint.

(2) Connect the 

ȭ

6mm air hose to the Secondary Joint to the Air Input Quick Disconnect on the front of the 

CONTROLLER.

(3) Insert the 

ȭ

6mm - 

ȭ

 4mm Conversion Adaptor into the Air Output Quick Disconnect on the front of the 

CONTROLLER.  Insert the 

ȭ

4mm air hose from the 

ȭ

6mm - 

ȭ

 4mm Conversion Adaptor to the 4mm Quick 

Disconnect on the back of the motor (

ȭ

6mm - 

ȭ

 4mm Conversion adaptor : CONTROLLER's Standard 

Accessories). (Fig. 6).

Fig. 6

Air Input Joint

Motor (EM-3030J / EM-3060J)

E3000 CONTROLLER

Air Output Joint

Primary Joint

Connector for Air Hose

Connection Hose

Secondary Joint

ȭ

6 One - Touch Joint

9 - 2  Connection of the Air Line Kit

Trouble

Inspection / Corrective Active

Broken connection hose and 
supply air hose. 

Replace the connection hose and supply air hose. 

No air 

À

ow.

Check the compressor power supply and the air compressor output.
Check if connection hose and supply air hose is broken, bent or 
disconnected.
Check the Regulator and set to the correct air pressure.
Check all connection hose and supply air hose connections.  

ON / OFF valve is OFF position. The ON / OFF valve set to ON position.

Air leakage.

Check all threaded joints and re-tighten if necessary.

Low air pressure.

Check the Compressor, Air Circuit, and Regulator.

Water, dirt and debris are collected 
in the Air Filter.

Drain water, dirt and debris from the Air Filter bowl.

10

. TROUBLESHOOTING

If a problem or concern occur, please check the following items prior to consulting your dealer.

11

. DISPOSAL OF THE AIR LINE KIT

When disposal of an Air Line Kit is necessary, follow the instructions from your local government agency for proper 
disposal of electrical components .

Summary of Contents for AL -C1204










Reviews: