10
CAUTION
①
Use of dry air
Using compressed air containing excessive moisture could result in malfunction or failure of
the air bearing spindle. If excessive moisture or condensation are found in Oil Mist Filter Bowl,
it will be necessary to install a dryer and larger Air Filter on the primary side of the Air Line Kit
to prevent and remove excessive moisture.
②
Draining
Be sure to drain moisture and condensation from Oil Mist Filter Bowl regularly to avoid
moisture and oil being carried to the air bearing spindle.
③
Installation Location
Place this Air Line Kit on a
À
at and level surface.
If mounting on a wall, check if the wall is
À
at, and securely mount the Air Line Kit in a
horizontal direction.
④
Handling
When removing the Bowl for cleaning, carefully remove them as not to cause damage to them.
CAUTIONS for STORAGE, INSTALLATION and OPERATION
①
Do not use the Air Line Kit where corrosive gasses, chemicals, seawater, water, oils or steam
exist.
②
Do not place in direct sunlight.
③
Do not use where the Air Line Kit is subject to vibration or repetitive shock.
④
Do not use where a heat source or radiated heat exist.
⑤
To conform to " STORAGE, INSTALLATION and OPERATION " (Refer to " 3. SPECIFICATIONS ").
①
This Air Line Kit is designed to supply clean and dry cooling and purging air to air bearing spindle and turbine
motor.
②
The Oil Mist Filter traps small amounts of water, oil and impure substances from the input air supply. This Air
Line Kit is not intended to be used or replace an Air Dryer.
③
Provides stable air
À
ow and proper air pressure to the air bearing spindle by using an adjustable Regulator.
④
Air pressure can be easily adjusted.
⑤
This Air Line Kit is wall mountable.
2
. FEATURES
