Nakamichi NAM1630, User Manual

Page: 14 / 24

12 EN
Delay Settings
Click [ Manual ] to enter the manual delay
settings interface.
Click [-] or [+] corresponding to the horn to
set the corresponding horn delay time.
Delay range:
Ms range: 0.00~20.00, Cm range: 0~692.
Unit switch:
Click [MS] to switch milliseconds.
Click [CM] to switch CM units.
Delay Horn Diagram
2. Determines the center of the currently set listening position as the reference point.
3. Measure the distance from the reference point to the horn.
4. Calculate the distance difference between the farthest speaker and the others.
5. Set the DTA value for each speaker step by step.
6. Adjust the gain of a single speaker.
Note: First confirm that the EQ is the standard
mode, the listening position, output volume,
and output crossover are the factory defaults.
Balance adjustment of the left and right
channels to output separately, and confirm
the consistency of the tweeter and midrange
speakers. The left and right channels must be
consistent, otherwise the delay It was chaotic.
Measure the distance of each speaker:
1. Determine the value of the listening bit, If you specify the distance from the
center of the currently set listening position to each speaker, the delay time is
calculated and set automatically.
Position Settings
Click [ ] to enter the auto delay settings
interface.
Click the seat icon on the right to set the
corresponding horn position.