i. Disconnecting from a Bluetooth device
Disable the Bluetooth on your smartphone or Bluetooth device. The
headphones will automatically disconnect from the device, and you will
hear a "BLUETOOTH DISCONNECTED" voice prompt. The
headphones will then search for previously paired devices. If no device
is found, the headphones will power off after 5 minutes.
ii. Start pairing with another Bluetooth device
Press and hold the shield button for more than 3 seconds
and the
ELSA light will start flashing in BLUE and RED. The headphones are
now in pairing mode and "Nakamichi ELSA" will appear on your
Bluetooth device (See also: Section 3ii, 4v)
iii. Adjusting the headband
For good sound quality and best possible wearing comfort, you can
adjust the earcups to match the size of your head. There is a locking
mechanism that allows the earcups to easily slide up and down.
Wear the headphones so that the headphones runs over the top of
your head.
Adjust the location of the earpads by moving the ear cups up and
down with the headband slider until:
- your ears are comfortably covered by the earpads,
- you feel even, gentle pressure around your ears,
- a snug fit of the headband on the head is ensured.
Menu
Bluetooth on
Bluetooth off
Disconnected!
Disable Bluetooth
®
1
2
1.
2.
5. USING THE HEADPHONES
15 ELSA
