Nakamichi BT HP01, User Manual

Page: 7 / 16

Adjusting the headband
For optimum transmission
quality, good noise attenuation
and best possible comfort, the
headband has to be adjusted to
properly fit your head:
. Wear the headset so that the
headband runs over the top of
your head.
. Adjust the length of the
headband so that
The ear pads rest comfortably
against your ears,
You feel an even and gentle
pressure around your ears,
A snug fitting of the headband
on the head.
Connecting the BT HP01 to an audio source
-------------------------------------------------------
CAUTION
Danger of malfunction due to radio waves!
The transmitted radio waves of mobile phones can impair the
operation of sensitive and unprotected devices.
Only use the headset in environments where wireless Bluetooth
transmission is permitted.
-------------------------------------------------------
The devices complies with the Bluetooth 3.0 standard.
When switching the device on for the first time, it will automatically
go into pairing mode. The device is waiting to be paired with a
Bluetooth enable device.
Press the On/Off button and keep it press until the LED
alternately flashes blue and red.
The LED will flash blue and red alternately to indicate the device is in
pairing mode.
Page 6