Nakamichi BT HP01, User Manual

Page: 11 / 16

Managing Calls
When the device is connected to mobile phone. When you received a
call, the LED will flash blue three times per second. You can also hear
the ringtone of the mobile phone, if your mobile phone supports this
function.
If your mobile phone automatically transfer the call to the headset,
you will hear a beep sound in the device. If your mobile phone does
not automatically transfer the call to the headset, you have to press a
button on your mobile phone to transfer the call (see the instruction
manual of your mobile phone).
To manage your call from your BT HP01, press the on/off button
Press once to accept the call. Press and hold for at least
2 seconds to reject the call.
Press once during a phone conversation to end the call.
Cleaning and maintaining the BT HP01
Cleaning the BT HP01
---------------------------------------------------------
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damages the electronics.
Keep all liquids far away from the products.
Do not use any solvents or cleansing agents.
---------------------------------------------------------
For reasons of hygiene, the device should always be clean regularly:
Before cleaning, make sure that the product is being charged.
Only use a dry and soft cloth to clean the product.
Page 10
Buttons Functions