43
• It is possible to carry out leg massage at the same time as upper body massage.
• If your calves are not in the correct position in the legrest, please adjust your legs so that they are.
1. Press the
button
• The programmed operation and leg massage button will flash.
2. Press the Leg Massage button
• The massage will start.
• The intensity of the massage will be displayed.
• It is possible to adjust the reclining angle during the massage.
Air will be released from the legrest while the Reclining Button
is pressed. Adjust the position of your legs during this time.
3. Adjusting Massage Intensity
• Leg massage intensity can be adjusted in 2 stages (EP1060).
• Leg massage intensity can be adjusted in 2 stages (EP1260).
4. Leg Massage Auto Stop
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
• If you want to start another massage, please press the
button.
5. STOPPING MANUAL OPERATION
Press the
button to stop the leg massage.
• It will take some time before all the air escapes from the leg massage unit.
(Air will continue to escape even after the
button has been pressed.)
LEG MASSAGE IN MANUAL OPERATION
gentle
strong
leg massage
gentle
strong
leg massage
gentle
strong
leg massage
gentle
strong
leg massage
gentle
strong
leg massage
Gentle
Strong
Off
Press
Press
Press
Press
Note
Integrated Timer to Prevent Overuse
• An integrated timer prevents overuse of the unit.
• When using manual operation, the timer automatically stops operation after 15 minutes (15–17 minutes).
* If you want to continue to use the unit, please wait at least 10 minutes between massages to allow your
body to rest.
gentle
strong
leg massage
gentle
strong
leg massage
gentle
strong
leg massage
Strong
Gentle
Off
Press
Press
Press
42
4. Adjusting Manual Massage Settings
Adjusting the Vertical Position of the Massage Heads
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button. When the
massage heads reach their limit you will hear a “peep, peep,
peep” sound.
Adjusting the Width between Massage Heads
• Vibration, Tap, Shiatsu Whole Back Roll, and Regional Roll
can be adjusted in 5-stages while Swedish can be adjusted in
3-stages.
• As Swedish covers the entire width of the back, it is not
possible to adjust width settings.
• The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
• When the massage heads reach their limit you will hear a
“peep, peep, peep” sound.
Adjusting Massage Intensity
• Massage intensity can be adjusted in 3 stages.
• When the massage heads reach their limit you will hear a
“peep, peep, peep” sound.
• As Roll or combining Roll with other massages sometimes
produces an especially strong massage, adjustment is limited
to medium or weak.
Example 2 Changing to a massage type outside the category.
(Changing to Tap B when Knead is selected.)
• When Knead is combined with Tap B, deselecting Knead will leave only Tap.
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
roll
manual operation
whole back
regional
tap A
vibration
tap B
swedish
shiatsu
knead
Press
Press
position
position
Raising the massage heads
Lowering the massage heads
Press
Press
position
position
Increasing the width
Decreasing the width
Press
Press
intensity
intensity
Increasing massage intensity
Decreasing massage intensity
Press
Press
Roll, Roll + (Shiatsu, Tap B, Tap A, Vibration) Combination..................................Weak/Medium
Roll + (Knead, Swedish Combination) ...................................................................Weak
• For Tap B, Swedish, and Vibration, unless the massage heads are actually touching the body, you may not
feel the movement.
5. Auto Stop in Manual Operation
• A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
(This is to prevent overuse in the interests of safety.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press the
button.
• Please wait at least 10 minutes between massages to allow your body to rest.
6. Stopping Manual Operation
Press the
button to stop manual operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
